skip to main navigation

LEDex UV55 Bar

$480.00

LEDex UV55 Suplemental UV Spectrum Bar

LEDex-Bar.png

Nanolux LEDex Series Fixtures are designed for full-cycle commercial cultivation that features many advantages compared with traditional light sources, bringing new efficiencies for your grow facility that weren’t possible before. This technology is revolutionizing the horticultural lighting industry in both lowering electric usage and increasing overall crop yield.

Nanolux distributes the 110W bars individually in case quantities. This allows you to utilize only the number of light bars as needed per track to meet your over all required PPFD on your canopy. The individual LED bars can also be used individually for side or intra-canopy lighting without the track.

Nanolux has designed its LED fixture around a modular concept. We sell tracks in 2’, 4’ and 8’ lengths. The tracks are designed for the 2’ track to accept 2-4 bars, the 4’ track to accept 4-8 bars and the 8’ track to accept 8-16 bars. This allows the end user to be able to adjust the overall light intensity over the canopy area and allows for greater ability to raise and lower the light over the canopy while maintaining a desired umol count.

Nanolux has designed five different bars with five different specific light frequency outputs. Full white, Blue, Blue/Red, Red and UV. This allows the end user to mix for white light with specific frequencies to aid in vegetative and flower growth.

LEDex Series fixtures allow random start, soft start, soft dimming capabilities, and feature over temperature protection, under voltage protection and open / short circuit protection. It is 0-10V COMPATIBLE, allowing control of your lighting with 0-10V protocol. The units can be used at any voltage range between 100-277 volts.

Screen-Shot-2021-06-02-at-8-24-49-pm.png

Nanolux LED grow lights provide fully modular flexibility and control suited for full cycle commercial operations. Using a clip-on design, the light bars easily connect to Nanolux LEDex light tracks allowing you to customize both the number of lights per track and the spacing between each light. This quick connect design also allows lights of different spectrums to be used together on the same track.

The UV light bar is dimmable from 5W-50W.

This 400nm UV light bar is a supplemental component.

UV light can speed up the germination process for starting seeds when grown indoors. As growers transplant seedlings to more intense light sources, UV strengthens the plants, better preparing them for high-intensity light. Transplanting seeds from low intensity to high-intensity lighting can shock or slow the plant's growth. Exposure to UV in the early stages of plant growth reduces shock time and speeds up the production process. The correct amount of UV light can increase oils and resins, increase root mass, improve taste and smell, and overall create higher potency plants.

Each type of bar can be mounted to the LEDex Track to build fixtures meeting your specific requirements in both spectrum and umol output. The LEDex bars all have their own 120 Volt - 277 Volt power supply integrated into them. This allows for each bar to be operated with its own power cord for intra-plant lighting or side lighting.

ledex-bar-UV-cut.png

Screen-Shot-2021-06-02-at-8-25-27-pm.png

Screen-Shot-2021-06-01-at-7-40-30-pm-(1).png

Note: This UV 400nm light bar is a supplemental component that makes up the NanoLux LEDex Modular Grow Light . This bar light IS NOT MEANT to be used a stand-alone grow light but as component for the NanoLux LEDEX Modular Grow Light.

The Power cord is NOT INCLUDED with the individual bar light but is included with the entire LEDEX Grow Light

 

Screen-Shot-2021-05-25-at-6-55-16-pm.png

 

Back to Categories
You may also be interested in...
More
More
back on top